Pulse Devices

Pulse Devices#

Pulse Devices allow you to bring environmental data from a connected Pulse Grow device into a GroBase Cycle.

Synced data can include temperature, humidity, VPD, and CO2 readings. You can review the readings in a table or chart to better understand how the grow environment changed over time.

Attention

Pulse Devices are available as an Advanced Integration and require Advanced View.

How to Add a Pulse Device#

  1. Open the Cycle where the Pulse Device should be added.

  2. Find the Equipment section.

  3. Select Add Pulse Device.

  4. Select a connected Integration.

  5. Select a Device.

  6. Select Add to connect the Pulse Device to the Cycle.

How to Delete a Pulse Device#

  1. Open the Cycle.

  2. Find the Pulse Device under the Equipment section.

  3. Select the Pulse Device to open its page.

  4. Select the trash icon.

  5. Confirm the deletion.

Warning

Deleting a Pulse Device from a Cycle also deletes the synced data associated with that device and Cycle.

Pulse Device Page#

The Pulse Device page displays information about the connected device, its synchronization history, and its environmental data.

Details#

The page header may display:

  • Device name

  • Cycle name

  • Device type

  • MAC address

  • Connected Pulse Integration

  • Delete action

Sync Data#

The Sync Data section lets you retrieve environmental data from the connected Pulse Device for a selected date range.

Sync Data Fields#

Field

Required

Description

Start Date

Yes

The beginning of the date range to sync.

End Date

No

The end of the date range to sync. When left blank, the current date is used.

Sync Interval

Yes

Controls how frequently data points are retrieved. Available options include Hourly, 30 Minutes, and 15 Minutes.

How to Sync Pulse Device Data#

  1. Open the Cycle.

  2. Find and select the Pulse Device under the Equipment section.

  3. Complete the Sync Data Fields.

  4. Select Sync.

The synchronization will begin in the background.

Note

Larger date ranges may take longer to process. You can leave the page and return later to review the synchronization status.

Sync Attempts#

The Sync Attempts section shows the history and status of synchronization requests for the Pulse Device.

Each attempt may display:

  • Start time

  • Finish time

  • Current status

  • Error message when a synchronization fails

A loading indicator is shown while a synchronization is still processing. A check mark indicates that it completed successfully.

Data Points#

The Data Points section displays the environmental readings retrieved from the Pulse Device.

Each data point may include:

  • Date and time

  • Temperature in Fahrenheit

  • Temperature in Celsius

  • Humidity

  • VPD

  • CO2

Table View#

Table View lists each synced reading and its timestamp.

Use the table controls to search, sort, or move between pages when available.

Chart View#

Chart View displays the synced readings over time.

The chart may include:

  • Temperature

  • Humidity

  • VPD

  • CO2

Select Zoom: OFF to enable chart zooming. When zoom is enabled, you can zoom or pan across the recorded date range.